View LB2012T100KR_6659718.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

notice_e-01 notice for taiyo yuden products y please read this notice before using the taiyo yuden products. reminders product information in this catalog is as of october 2010. all of the contents speci?ed herein are subject to change with out notice due to technical improvements, etc. therefore, please check for the latest information carefully be - fore p r actical application or usage of the products. pl e ase note that taiyo yuden co., ltd. shall not be responsible for any defects in products or equipment incorpo - rat i ng such products, which are caused under the conditions other than those speci?ed in this catalog or individual spe c i?cation. please contact taiyo yuden co., ltd. for further details of product speci?cations as the individual speci?cation is ava i lable. please conduct validation and veri?cation of products in actual condition of mounting and operating environment befo r e commercial shipment of the equipment. a l l electronic components or functional modules listed in this catalog are developed, designed and intended for use i n general electronics equipment.(for av, office automation, household, office supply, information service, tel e communications, (s u ch as mobile phone or pc) etc.). before incorporating the components or devices into any equipment in the ?eld such as transportation,( automotive control, train control, ship control), transportation signal, dis a ster prevention, medical, public information network (telephone exchange, base station) etc. which may have dir e ct in?uence to harm or injure a human body, please contact taiyo yuden co., ltd. for more detail in advance. do n ot incorporate the products into any equipment in ?elds such as aerospace, aviation, nuclear control, subma - rin e s ystem, military, etc. where higher safety and reliability are especially required. in a ddition, even electronic components or functional modules that are used for the general electronic equipment, if t h e equipment or the electric circuit require high safety or reliability function or performances, a suf?cient reliabil - ity e valuation check for safety shall be performed before commercial shipment and moreover, due consideration to ins t all a protective circuit is strongly recommended at customer's design stage. t h e contents of this catalog are applicable to the products which are purchased from our sales of?ces or distribu - tor s ( so called ? tai y o yuden ? s of?cial sales channel ? ). it is only applicable to the products purchased from any of taiyo yuden ? s of? c ial sales channel. please note that taiyo yuden co., ltd. shall have no responsibility for any controversies or disputes that may oc - cur i n connection with a third party's intellectual property rights and other related rights arising from your usage of pro d ucts in this catalog. taiyo yuden co., ltd. grants no license for such rights. c a ution for export ce r tain items in this catalog may require speci?c procedures for export according to ? for e ign exchange and for - eign trade control law ? of j apan, ? u.s. export administration regulations ? , and other applicable regulations. should you have any question or inquiry on this matter, please contact our sales staff.
46 wound01_e-02 features ordering code external dimensions/standard quantity available inductance range applications operating temp. this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. surface mounting ? mounting and soldering con - ditions should be checked beforehand. ? applicable soldering process to those products is re?ow soldering only. ? recommended land patterns external dimensions lb-series are wound chip inductors having wide line-up, which are suitable for any circuit designs. ? lbc series has large rated current. they contribute to the miniatur - ization of the power supply circuit. ? lbr series has low dc resistance. they contribute to the miniaturiza - tion of the power supply circuit. ? lbmf series has a low loss characteristic. ? they are suitable for an anti-noise measure on the power supply circuit of dsc, dvc, hdd, lcd-tv, mobile phones,pc, game equipments, various communication equipments and etc.. ? 40 105 including-self-generated heat wound chip inductors ( lb series ) l b 2 0 1 2 t 1 0 0 ? ? ? ? ? ? ? ? type l w t e standard quantity [pcs] paper tape embossed tape lb1608 1.6 0.1 0.063 0.004 0.8 0.1 0.031 0.004 0.8 0.1 0.031 0.004 0.35 0.15 0.014 0.006 4000 lbmf1608 1.6 0.2 0.063 0.008 0.8 0.2 0.031 0.008 0.8 0.2 0.031 0.008 0.45 0.15 0.016 0.006 3000 lb2012 lbc2012 lbr2012 2.0 0.2 0.079 0.008 1.25 0.2 0.049 0.008 1.25 0.2 0.049 0.008 0.5 0.2 0.020 0.008 3000 lb2016 lbc2016 2.0 0.2 0.079 0.008 1.6 0.2 0.063 0.008 1.6 0.2 0.063 0.008 0.5 0.2 0.020 0.008 2000 lb2518 lbc2518 lbr2518 2.5 0.2 0.098 0.008 1.8 0.2 0.071 0.008 1.8 0.2 0.071 0.008 0.5 0.2 0.020 0.008 2000 lb3218 3.2 0.2 0.128 0.008 1.8 0.2 0.071 0.008 1.8 0.2 0.071 0.008 0.6 0.2 0.024 0.008 2000 lbc3225 3.2 0.2 0.128 0.008 2.5 0.2 0.098 0.008 2.5 0.2 0.098 0.008 0.6 0.3 0.024 0.012 1000 unit mm inch ? type lb wound chip inductor ? internal code standard products blank space ? special code standard products r low rdc type ? external dimensions mm 1608 0603 1.6 0.8 2012 0805 2.0 1.25 2016 0806 2.0 1.6 2518 1007 2.5 1.8 3218 1207 3.2 1.8 3225 1210 3.2 2.5 ? nominal inductance h example 1r0 1 100 10 101 100 r=decimal point ? shape standard products c high current r low rdc mf low loss ? inductance tolerances k 10 m 20 ? packaging t tape & reel unit mm type a b c 1608 0.55 0.7 0.9 mf1608 0.55 0.7 1.0 2012 0.60 1.0 1.45 2016 0.60 1.0 1.8 2518 0.60 1.5 2.0 3218 0.85 1.7 2.0 3225 0.85 1.7 2.7 aa c b reflow range type lb1608 lbmf1608 lb2012 lbc2012 lbr2012 lb2016 lbc2016 lb2518 lbc2518 lbr2518 lb3218 lbc3225 1 imax. ma ? rdc 30 ?? imax. ma ? rdc 30 ?? imax. ma ? rdc 30 ?? imax. ma ? rdc 30 ?? imax. ma ? rdc 30 ?? imax. ma ? rdc 30 ?? imax. ma ? rdc 30 ?? imax. ma ? rdc 30 ?? imax. ma ? rdc 30 ?? imax. ma ? rdc 30 ?? imax. ma ? rdc 30 ?? imax. ma ? rdc 30 ?? 160 1 h 0.17 230 1 h 0.09 405 1 h 0.15 620 1 h 0.19 400 1 h 0.07 490 1 h 0.09 690 1 h 0.1 665 1 h 0.06 775 1 h 0.08 960 1 h 0.045 1075 1 h 0.06 1100 1 h 0.055 10 70 0.55 80 0.36 120 0.7 200 1.2 150 0.36 155 0.5 245 0.82 165 0.25 375 0.36 235 0.19 340 0.25 540 0.133 60 0.7 100 10 h 35 2.5 45 7.0 90 5.8 50 4.0 40 4.5 75 8.0 60 2.1 125 3.70 80 1.89 140 2.40 150 1.4 47 h 47 h 1000 100 h 100 h 100 h 100 h 15 24 45 28.0 100 h 39 27 100 h 680 h 1000 h 1000 h inductance ? h
ferrite products 47 wound01_e-02 part numbers this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 1608 0603 type ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lb 1608t1r0m 1.0 20% 100 0.17 160 7.96 lb 1608t2r2m 2.2 80 0.33 115 lb 1608t4r7m 4.7 45 0.55 70 lb 1608t8r2m 8.2 32 0.70 60 2.52 lb 1608t100m 10 32 0.70 60 ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lbmf1608t1r0m 1.0 20% 100 0.09 230 7.96 lbmf1608t2r2m 2.2 80 0.17 160 lbmf1608t3r3m 3.3 60 0.22 130 lbmf1608t4r7m 4.7 45 0.24 110 lbmf1608t100 10 10% 20% 32 0.36 80 2.52 lbmf1608t220 22 16 1.00 50 lbmf1608t470 47 11 2.50 35 ? please specify the inductance tolerance code k or m 2012 0805 type 2016 0806 type ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lb c2012t1r0m 1.0 20% 100 0.19 620 7.96 lb c2012t2r2m 2.2 70 0.33 430 lb c2012t4r7m 4.7 45 0.5 295 lb c2012t100 10 10% 20% 40 1.2 200 2.52 lb c2012t220 22 16 3.7 130 lb c2012t470 47 11 5.8 90 ? please specify the inductance tolerance code k or m ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lb 2016t1r0m 1.0 20% 100 0.09 490 7.96 lb 2016t1r5m 1.5 80 0.11 380 lb 2016t2r2m 2.2 70 0.13 375 lb 2016t3r3m 3.3 55 0.20 285 lb 2016t4r7m 4.7 45 0.25 225 lb 2016t6r8m 6.8 38 0.35 200 lb 2016t100 10 10% 20% 32 0.50 155 2.52 lb 2016t150 15 28 0.70 130 lb 2016t220 22 16 1.0 105 lb 2016t330 33 14 1.7 85 lb 2016t470 47 11 2.4 70 lb 2016t680 68 10 3.0 55 lb 2016t101 100 8 4.5 40 0.796 ? please specify the inductance tolerance code k or m ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lb 2012t1r0m 1.0 20% 100 0.15 405 7.96 lb 2012t2r2m 2.2 80 0.23 260 lb 2012t3r3m 3.3 55 0.30 235 lb 2012t4r7m 4.7 45 0.40 190 lb 2012t6r8m 6.8 38 0.47 135 lb 2012t100 10 10% 20% 32 0.7 120 2.52 lb 2012t100 r 10 32 0.5 120 lb 2012t150 15 28 1.3 100 lb 2012t220 22 16 1.7 80 lb 2012t470 47 11 3.7 60 lb 2012t680 68 10 6.0 50 lb 2012t101 100 8 7.0 45 0.796 ? please specify the inductance tolerance code k or m ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lb r2012t1r0m 1.0 20% 100 0.07 400 7.96 lb r2012t2r2m 2.2 80 0.13 260 lb r2012t4r7m 4.7 45 0.24 200 lb r2012t100 10 10% 20% 32 0.36 150 2.52 lb r2012t220 22 16 1 100 lb r2012t470 47 11 1.7 75 lb r2012t101 100 8 4 50 0.796 ? please specify the inductance tolerance code k or m
48 wound01_e-02 part numbers this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 2518 1007 type ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lb c2016t1r0m 1.0 20% 100 0.1 690 7.96 lb c2016t1r5m 1.5 80 0.15 600 lb c2016t2r2m 2.2 70 0.2 520 lb c2016t3r3m 3.3 55 0.27 410 lb c2016t4r7m 4.7 45 0.37 355 lb c2016t6r8m 6.8 38 0.59 290 lb c2016t100 10 10% 20% 32 0.82 245 2.52 lb c2016t150 15 28 1.2 200 lb c2016t220 22 16 1.8 165 lb c2016t330 33 14 2.8 135 lb c2016t470 47 11 4.3 110 lb c2016t680 68 10 7 95 lb c2016t101 100 8 8 75 0.796 ? please specify the inductance tolerance code k or m ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lb r2518t1r0m 1.0 20% 100 0.045 960 7.96 lb r2518t2r2m 2.2 68 0.07 480 lb r2518t4r7m 4.7 45 0.1 345 lb r2518t100 10 10% 20% 30 0.19 235 2.52 lb r2518t220 22 19 0.44 175 lb r2518t470 47 11 0.84 120 lb r2518t101 100 9 1.89 80 0.796 ? please specify the inductance tolerance code k or m ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lb 2518t1r0m 1.0 20% 100 0.06 665 7.96 lb 2518t1r5m 1.5 80 0.07 405 lb 2518t2r2m 2.2 68 0.09 340 lb 2518t3r3m 3.3 54 0.11 280 lb 2518t4r7m 4.7 46 0.13 240 lb 2518t4r7mr 4.7 46 0.10 235 lb 2518t6r8m 6.8 38 0.15 195 lb 2518t100 10 10% 20% 30 0.25 165 2.52 lb 2518t150 15 23 0.32 145 lb 2518t220 22 19 0.50 115 lb 2518t330 33 15 0.70 95 lb 2518t470 47 12 0.95 85 lb 2518t680 68 9.5 1.50 70 lb 2518t101 100 9 2.10 60 0.796 lb 2518t151 150 7 3.20 45 lb 2518t221 220 5.5 4.50 40 lb 2518t331 330 4.5 7.00 30 lb 2518t471 470 3.5 10 25 lb 2518t681 680 3 17 20 lb 2518t102 1000 2.4 24 15 0.252 ? please specify the inductance tolerance code k or m ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lb c2518t1r0m 1.0 20% 100 0.08 775 7.96 lb c2518t1r0mr 1.0 100 0.065 890 lb c2518t1r5m 1.5 80 0.11 730 lb c2518t2r2m 2.2 68 0.13 630 lb c2518t3r3m 3.3 54 0.16 560 lb c2518t4r7m 4.7 41 0.2 510 lb c2518t6r8m 6.8 38 0.3 420 lb c2518t100 10 10% 20% 30 0.36 375 2.52 lb c2518t150 15 23 0.65 285 lb c2518t220 22 19 0.77 250 lb c2518t330 33 15 1.5 185 lb c2518t470 47 12 1.9 165 lb c2518t680 68 9.5 2.8 140 lb c2518t101 100 9 3.7 125 0.796 lb c2518t151 150 7 6.1 95 lb c2518t221 220 5.5 8.4 80 lb c2518t331 330 4.5 12.3 65 lb c2518t471 470 3.5 22 50 lb c2518t681 680 3 28 45 ? please specify the inductance tolerance code k or m
ferrite products 49 wound01_e-02 part numbers this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 3218 1297 type 3225 1210 type ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lb 3218t1r0m 1.0 20% 100 0.06 1075 7.96 lb 3218t1r5m 1.5 80 0.07 860 lb 3218t2r2m 2.2 68 0.09 775 lb 3218t3r3m 3.3 54 0.11 560 lb 3218t4r7m 4.7 41 0.13 550 lb 3218t6r8m 6.8 40 0.17 380 lb 3218t100 10 10% 20% 30 0.25 340 2.52 lb 3218t150 15 25 0.32 300 lb 3218t220 22 19 0.49 255 lb 3218t330 33 15 0.75 215 lb 3218t470 47 12 0.92 205 lb 3218t680 68 11 1.49 145 lb 3218t101 100 8 2.40 140 0.796 lb 3218t151 150 7 3.20 105 lb 3218t221 220 5 5.40 80 lb 3218t331 330 4 7.00 65 lb 3218t471 470 3.5 14.0 54 lb 3218t681 680 3 17.0 45 lb 3218t102 1000 2.4 27.0 39 0.252 ? please specify the inductance tolerance code k or m ordering code inductance h inductance tolerance self-resonant frequency mhz min. dc resistance ? 30 rated current ma max. measuring frequency mhz lb c3225t1r0mr 1.0 20% 250 0.055 1100 0.1 lb c3225t1r5mr 1.5 220 0.060 1000 lb c3225t2r2mr 2.2 190 0.080 930 lb c3225t3r3mr 3.3 160 0.095 820 lb c3225t4r7mr 4.7 70 0.100 680 lb c3225t6r8mr 6.8 50 0.120 620 lb c3225t100 r 10 10% 20% 23 0.133 540 lb c3225t150 r 15 20 0.195 420 lb c3225t220 r 22 17 0.270 330 lb c3225t330 r 33 13 0.410 300 lb c3225t470 r 47 10 0.670 220 lb c3225t680 r 68 8 1.00 190 lb c3225t101 r 100 6 1.40 150 ? please specify the inductance tolerance code k or m
50 wound01_e-02 electrical characteristics this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. dc bias characteristics measured by hp4285a 42841a inductance h dc bias ma lbc2518 11 0 0.1 1 100 10 1000 100 10000 1000 1r0m 101? 100? inductance h dc bias ma lb1608 11 0 0.1 1 10 100 100 1000 1r0m 100m inductance h dc bias ma lbmf1608 11 0 0.1 1 10 100 1000 1r0m 100? 4r7m inductance h dc bias ma lb2012 11 0 0.1 1 100 10 1000 100 10000 1000 1r0m 101? 100? inductance h dc bias ma lbc2012 11 0 0.1 1 10 100 100 1000 1r0m 470? 100? inductance h dc bias ma lbr2012 11 0 1 10 100 1000 100 1000 1r0m 101? 100? inductance h dc bias ma lb2016 11 0 0.1 1 100 10 1000 100 10000 1000 1r0m 101? 100? inductance h dc bias ma lbc2016 11 0 0.1 1 100 10 1000 100 10000 1000 1r0m 101? 100? inductance h dc bias ma lb2518 11 0 0.1 1 100 10 1000 100 10000 1000 1r0m 101? 100? inductance h dc bias ma lbr2518 11 0 0.1 1 100 10 1000 100 10000 1000 1r0m 101? 100? inductance h dc bias ma lb3218 11 0 0.1 1 100 10 1000 100 10000 1000 1r0m 101? 100? inductance h dc bias ma ! 3225 11 0 0.1 1 100 10 100 10000 1000 101 ?' 100 ?' 1r0mr
ferrite products 51 wound01_e-02 this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs.
wound0103_reli-prp1 wound0103_reli_e-01 packaging this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. tape material taping dimensions ? embossed tape 0.315 inches wide ?car d board carrier tape 0.315 inches wide type chip cavity insertion pitch tape thickness a b f t k lbm 2016 1.7 5 0 .1 0.069 0.004 2.1 0.1 0.083 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 1.9max. 0.074 lem 2520 2.3 0 . 1 0.091 0.004 2.7 0.1 0.106 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 2.1 0.1 0.083 0.004 lbc3225/ cbc3225 2.8 0.1 0.110 0.004 3.5 0.1 0.138 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 4.0max. 0.157 lb3218 2.1 0.1 0.084 0.004 3.5 0.1 0.014 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 2.2max. 0.086 lb2518 / cb2518 lbc2518 / cbc2518 lbr 2 518 2.15 0.1 0.085 0.004 2.7 0.1 0.107 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 2.2max. 0.086 lb2016/ cb2016 lbc2016 / cbc2016 1.75 0.1 0.069 0.004 2.1 0.1 0.083 0.004 4.0 0.1 0.157 0.004 0.3 0.05 0.012 0.002 1.9max. 0.074 lb2012 / cb2012 lbc2012 / cbc2012 lbr2012 1.45 0.1 0.058 0.004 2.25 0.1 0.09 0.004 4.0 0.1 0.157 0.004 0.25 0.05 0.010 0.002 1.45max. 0.057 cbl2012 1.55 0.1 0.061 0.004 2.3 0.1 0.091 0.004 4.0 0.1 0.157 0.004 1.1max. 0.044 1.1max. 0.044 lb1608 1.0 0.1 0.059 0.004 1.8 0.1 0.072 0.004 4.0 0.1 0.157 0.004 1.1max. 0.044 1.1max. 0.044 lbmf1608 / cbmf1608 1.1 0.1 0.04 0.004 1.9 0.1 0.076 0.004 4.0 0.1 0.157 0.004 0.25 0.05 0.010 0.002 1.2max. 0.047 unit mm inc h minimum quantity type standard quantity pcs papar tape emb o ssed tape lbc3 225/cbc3225 ` 1000 lb3218 ` 2000 lbr2518/lbc2518/lb251 /cb2518/cbc2518/lem2520 ` 2000 lbm2016/lbc2016/ lb2016 /cb2016/cbc2016 ` 2000 lb2012/lbc2012/lbr202 /cb2012/cbc2012 ` 3000 cbl2012 4000 ` lb1608 4000 ` lbmf1608/cbmf1608 ` 3000 ?embossed tape leader and blank portion reel size the top tape requires a peel-off force 0.2 to 0.7n in the direction of the arrow as illustrated below. top tape strength pull direction 10.0 ? 1.5 (0.394 ? 0.059) 180 7.09 ) 0 3 0 0.118 60 2.36 ) 1 0 0.039 0 2.5 max 0.098
wound0103_reli-prp2 wound0103_reli_e-01 reliability data this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 1.operating temperature range lb, lbc, lbr, lbmf series ` 40 105 including self-generated heat cb, cbc, cbl, cbmf series lbm series lem series ` 4 0 85 2.storage lb, lbc, lbr, lbmf series ` 40 85 cb, cbc, cbl, cbmf series lbm, lem series t e st methods and remarks please r efer the term of "7. storage conditions" in precautions. 3.rated current lb, lbc, lbr, lbmf series within the speci?ed tolerance cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks lem series the maximum dc value having inductance decrease within 10 and temperature incr ease within 20 by the application of dc bias. 4.inductance lb, lbc, lbr, lbmf series within the speci?ed tolerance cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks lem series measuring equipment lcr meter hp4285a 42851a or its equivalent measuring frequency speci?ed frequency lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbmf ? cbmf ? lbm series measuring equipment lcr mater hp4285a or its equivalent 5.q lb, lbc, lbr, lbmf series cb, cbc, cbl, cbmf series lbm, lem series within the speci?ed tolerance te st methods and remarks lem series measuring equipment lcr meter hp4285a 42851a or its equivalent measuring frequency speci?ed frequency lbm series measuring equipment lcr mater hp4285a or its equivalent 6.dc resisitance lb, lbc, lbr, lbmf series within the speci?ed tolerance cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks measuring equipment dc ohmmeter hioki 3227 or its equivalent 7.self-resonant frequency lb, lbc, lbr, lbmf series within the speci?ed tolerance cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks measuring equipment impedance analyzer hp4291a or its equivalent 8.temperature characteristic lbm2016 lem2520 inductance change:within5 lb1608 lb2012 lbr2012 cb2012 cbl2012 lb2016 cb2016 lb2518 lbr2518 cb2518 lbc3225 cbc3225 inductance change:within20 lbmf1608 cbmf1608 lbc2016 cbc2016 lbc2518 cbc2518 lb3218 inductance change:within25 lbc2012 cbc2012 inductance change:within35 t est methods and remarks change of maximum inductance deviation in step 1-5 lb, cb series step 1 2 3 4 5 temperture 20 ` 40 20 reference temperature 85 maximum operating temperature 20 lem2520 step 1 2 3 4 5 temperture 20 ` 25 20 reference temperature 85 maximum operating temperature 20 9.rasistance to flexure of substrate lb, lbc, lbr, lbmf series no damage. cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks warp 2mm lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf series pressing jig board lb ~ lbmf ~ cbmf1608 y 0.8mm others 1.0mm lem2520 1.6mm 3mm lem2520 test substrate: board according to jis c0051
wound0103_reli-prp3 wound0103_reli_e-01 reliability data this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 10.body strength lb, lbc, lbr, lbmf series no damage. cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lem2520 applied force 10n duration 10sec. lb1608 ? lbmf1608 ? cbmf1608 applied for ce 5n duration 10sec. 11.adhesion of terminal electrode lb, lbc, lbr, lbmf series no abnormality. cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf ? lem2520 applied for ce 10n to x and y dir ections duration 5 sec. test substrate printed board lb1608 ? cbmf1608 ? lbmf1608 applied force 5n to x and y dir ections duration 5 sec. test substrate printed board 12.resistance to vibration lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm, lem series inductance change:within 5 no signi?cant abnormality in appearance. test methods and remarks lem ? lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf according to jis c5102 clause 8.2. vibration type a dire ctions 2 hrs each in x, y and z directions. total 6 hrs fr equency range 10 to 55 to 10 hz 1min. amplitude 1.5mm mounting method soldering onto printed boar d recovery at least 2 hrs of recovery under the standard condition after the test, followed by the measur ement within 48 hrs. lem recovery at least 1 hr of r ecovery under the standard condition after the test, followed by the measur ement within 2 hrs. 13.drop test lb, lbc, lbr, lbmf series cb, cbc, cbl, cbmf series lbm series lem series inductance change:within 5 n o signi?cant abnormality in appearance. test methods and remarks lem acceleration 9 80m/sec2 duration 6msec number of times 6 sides 3 times mounting method soldering onto printed boar d recovery at least 2 hrs of recovery under the standard condition after the test, followed by the measur ement within 48 hrs. lem recovery at least 1 hr of r ecovery under the standard condition after the test, followed by the measur ement within 2 hrs. 14.solderability lb, lbc, lbr, lbmf series at least 90 of surface of terminal electrode is covered by new cb, cbc, cbl, cbmf series lbm, lem series t e st methods and remarks lem solder temperatur e 230 5 duration 5 0.5sec. flux methanol solution with 25 of colophony lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf solder temperature 245 5 duration 5 0.5sec flux methanol solution with 25 of colophony
wound0103_reli-prp4 wound0103_reli_e-01 reliability data this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 15.resistance to soldering lb, lbc, lbr, lbmf series inductance change:within 10 cb, cbc, cbl, cbmf series lem series inductance change:within 5 lem2520 no signi?cant abnormality in appearance. te st methods and remarks lem re?ow condition 3 times of re ?ow over at 220 5 for 40sec. max, with peak temperature at 240 5 for 5 sec. max. refer to a pro?le of chart below. flow condition solder temperatur e 260 5 duration 10 1sec. once lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf 3 times of re?ow oven at 230 min for 40sec. with peak temperatur e at 260 for 5sec. 16.resisitance to solvent lb, lbc, lbr, lbmf series no signi?cant abnormality in appearance cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks solvent temperature room temperature type of solvent isopropyl alcohol cleaning conditions 90s. immersion and cleaning. 17.thermal shock lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm series lem series inductance change :within 1 0 q r12 4r7 30 min. 5r6 330 25 min. 390 820 20 min. 101 15 min. t est methods and remarks lem : conditions for 1cycle step temperature duration min 1 ` 40 30 2 85 30 number of cycle 100 cycle recovery at least 1 hr of recovery under the standard condition after the test, followed by the measur ement within 2 hrs. lb ? lbc ? lbr ? cb ? cbc ? cbl ? lbm ? lbmf ? cbmf ` 40 85 , maintain times 30min. ,100 cycle recovery at least 2 hrs of recovery under the standard condition after the test, followed by the measur ement within 48 hrs. 18.damp heat life test lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm series lem series inductance change :within 1 0 q r12 4r7 30 min. 5r6 330 25 min. 390 820 20 min. 101 15 min. t est methods and remarks temperatur e 60 2 humidity 90 95 rh duration 1000 hrs recovery at least 2 hrs of r ecovery under the standar d condition after the test, followed by the measur ement within 48 hrs. lem recovery at least 1 hr of r ecovery under the standard condition after the test, followed by the measur ement within 2 hrs. 19.loading under damp heat life test lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm series lem series inductance change :within 1 0 q r12 4r7 30 min. 5r6 330 25 min. 390 820 20 min. 101 15 min. t est methods and remarks temperatur e 60 2 humidity 90 95 rh duration 1000 hrs applied curr ent rated current recovery at least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. lem recovery at least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
wound0103_reli-prp5 wound0103_reli_e-01 reliability data this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 20.high temperature life test lb, lbc, lbr, lbmf series cb, cbc, cbl, cbmf series inductance change:within 10 no signi?cant abnormality in appearance. lbm series lem series inductance change :within 10 q r12 4r7 30 min. 5r6 330 25 min. 390 820 20 min. 101 15 min. t est methods and remarks temperatur e 85 2 duration 1000 hrs recovery at least 2 hrs of r ecovery under the standard condition after the test, followed by the measur ement within 48 hrs. lem recovery at least 1 hr of r ecovery under the standard condition after the test, followed by the measur ement within 2 hrs. 21.loading at high temperature life test lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm, lem series te st methods and remarks temperature 85 2 duration 1000 hrs applied current rated current recovery at least 2 hrs of recovery under the standar d condition after the test, followed by the measur ement within 48 hrs. 22.low temperature life test lb, lbc, lbr, lbmf series inductance change:within 10 no signi?cant abnormality in appearance. cb, cbc, cbl, cbmf series lbm series lem series inductance change :within 1 0 q r12 4r7 30 min. 5r6 330 25 min. 390 820 20 min. 101 15 min. t est methods and remarks temperatur e 40 2 duration 1000 hrs recovery at least 2 hrs of r ecovery under the standard condition after the test, followed by the measur ement within 48 hrs. lem recovery at least 1 hr of r ecovery under the standard condition after the test, followed by the measur ement within 2 hrs. 23.standard condition lb, lbc, lbr, lbmf series standard test conditions unless speci?ed, ambient temperature is 20 15 and the relative humidity is 65 20 . if ther e is any doubt about the test r esults, further measur ement shall be had within the following limits: ambient te mperature: 20 2 relative humidity: 65 5 inductance value is based on our standar d measur ement systems. cb, cbc, cbl, cbmf series lbm, lem series
wound0103_reli-prp6 wound0103_reli_e-01 precautions this catalog contains the typical speci?cation only due to the limitation of space. when you consider the purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 1 circuit design precautions operating environment 1 the products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, mea s uring equipment, and household equipment). they are not intended for use in mission-critical equipment or systems requiring special quality and high reliability (traf ?c systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or damage. for such uses, contact t aiyo yuden sales department in advance. 2 pcb design precautions land pattern design 1 please contact any of our of?ces for a land pattern, and refer to a recommended land pattern of a right ?gure or speci?cations. technical consider - ations precautions r ecommended land patterns surface mounting ? mounting and soldering conditions should be checked befor ehand. ? applicable soldering pr ocess to those products is re?ow soldering only. 3 considerations for automatic placement precautions adjustment of mounting machine 1. excessive impact load should not be imposed on the products when mounting onto the pc boards. 2. mounting and soldering conditions should be checked beforehand. technical consider - ations 1. when installing products, car e should be taken not to apply distortion str ess as it may deform the pr oducts. 4 soldering precautions wave soldering lem type only 1 for wave soldering,please apply conditions meeting the range of the specifed conditions in our catalog or the r elevant speci?cations. re?ow soldering lb and cb types 1 for r e?ow soldering with either leaded or lead-fr ee solder,the pro?le speci?ed in "point for controlling" is recommended. re?ow soldering lem 1 for r e?ow soldering, please apply conditions meeting the range of the speci?ed conditions in our catalog or the r elevant speci?cations. recommended conditions for using a soldering iron 1 put the soldering iron on the land-pattern. soldering iron's temperature - below 350 duration-3 seconds or less. the soldering iron shoud not come in contact with inductor directly. technical consider - ations wa ve soldering lem type only 1 components can be damaged by excessive heat wher e soldering conditions exceed the speci?ed range. re?ow soldering lb and cb types 1 re?ow pr o?le 300 250 200 150 100 50 0 pre-heat zone 90 ? 30 sec 30 ? 10 sec 230? minn peak temp: 260 0/ ? 5? 5 sec max 180? 150? recommended conditions for using a soldering iron 1 components can be damaged by excessive heat where soldering conditions exceed the speci?ed range. 5 cleaning precautions cleaning conditions washing by supersonic waves shall be avoided. technical consider - ations cleaning conditions if washed by supersonic waves, the pro ducts might be broken. 6 handling precautions handling 1 there is a case that a characteristic varies with magnetic in?uence. breakaway pc boar ds splitting along perforations 1 planning patter n con?gurations and the position of pr oducts should be carefully performed to minimize stress. mechanical considerations 1 t here is a case to be damaged by a mechanical shock. technical consider - ations handling 1 k eep the inductors away fr om all magnets and magnetic objects. breakaway pc boar ds splitting along perforations 1 when splitting the pc boar d after mounting inductors, car e should be taken not to give any stresses of de?ection or twisting to the board. 2 board separation should not be done manually, but by using the appropriate devices. mechanical considerations 1 p lease do not give the inductors any excessive mechanical shocks. 7 storage conditions precautions storage 1 under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place. technical consider - ations storage 1 to maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. ? recommended conditions ambient temperature 0 40 humidity below 70% rh the ambient temperature must be kept below 30 even under ideal storage conditions, solderability of products electrodes may decrease as time passes. for this reason, le type inductors should be used within one year from the time of delivery. lb type should be used within 6 months from the time of delivery. le type in case of storage over 6 months, solderability shall be checked before actual usage. lem type lb type cb type

▲Up To Search▲

Price & Availability of LB2012T100KR

	To Download LB2012T100KR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .